How to better protect your electric bike battery and the best use of your bicycle value?

The  battery life of a mountain electric bike depends on how everyone uses it, and the booster battery of a mountain ebike is no exception. It is inevitable that it will gradually age with the length of use. Today, I will share some tips to help us how to be the best to use a ebike battery and enhance your riding faith.

 

Battery environment:

electric bicycle battery location diagram


We must first know that no matter what kind of battery needs to be charged, the ambient temperature for charging the battery cannot be too high or too low. Of course, an environment that can maintain constant temperature charging is the most ideal. If the temperature of the charging environment is around 20 degrees Celsius The most suitable, the temperature is best not below zero, it is best not to charge in a very humid environment. There are many areas where the management and charging can only be done outdoors, and it can be clearly felt that the battery power drops rapidly, which will also shorten the life of the battery. Due to the low temperature and slow lithium ion activity, a large voltage is required to drive the battery to work. This results in a greater consumption of the battery.

Battery status:

a man installs an electric bicycle battery


You must know that the battery will not be damaged by overcharging and discharging. We only need to fully charge the battery before every ride. If the battery is completely consumed by riding on the road, it will bring a lot of load to the battery. A charge like this and discharge, which is one battery cycle.

Battery storage:

Battery storage


When we don’t ride electric mopeds for a long time, it should be noted that we must not let the battery fully discharge, at least keep more than 30% of the power, and some even maintain more than 70% of the power. It should be charged every six months, and the battery should be kept dry and ventilated to avoid short circuit or damage.

Battery care:

E-Bike Battery Maintenance


It is recommended to remove the battery before cleaning the bicycle. It is not excluded that some brands should leave the battery in place, mainly to protect the exposed socket. Be careful to keep away from the high-pressure water gun. It is better to wipe with a sponge. You can also use a soft and dry brush or Cleaning with a cotton swab is also good. If you have any other questions, you can directly call the after-sales phone.

Final summary:


The fewer times the mountain electric bike battery is charged and discharged, the longer the battery will last. Every time you ride an electric bicycle, you need to find the best rhythm with the electric assist motor during pedaling. This is a very smart choice. Make full use of the riding mode selected by the smart computer of the electric bicycle. The maximum power output of the motor helps us to climb the slope, but at this time, the cadence should not be reduced to the lowest cadence. Not only the smart computer may make mistakes in judgment, but also consumes the battery very much.

At the same time,if you are interested in electric mountain bike specialized,please click on the link below:https://randridebikes.com/collections/mountain-electric-bike/products/fat-tire-electric-bike


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.