RANDRIDE Ebike P01 - P20 Default Parameter Settings
Restore ebike to default setting.
① Start the power, press the + & - button at the same time, then press the power button to enter P01-P20, and press the + / - button to adjust the number of the setting.
② P1 to P20 are adjusted to the corresponding numbers, after each adjustment, press the + & - button at the same time to save.
Note：P01 adjusts the brightness, P02 switches between miles or kilometers, P06 is the tire size. And P16 is the mileage, does not need to be modified. Other parameters should be adjusted to the default setting parameters.
| P01 | P02 | P03 | P04 | P05 | P06 | P07 | P08 | P09 | P10 | P11 | P12 | P13 | P14 | P15 | P16 | P17 | P18 | P19 | P20 |
|
001 /002 /003 |
000 /001 |
048 | 010 | 001 |
20 /26 /27.5 |
001 | 100 | 000 | 002 | 003 | 003 | 012 | 015 | 39 | 000 | 000 | 100 | 000 | 000 |
For more e-bike setup, click here to visit the user operation manual page.
For the default parameters of dual motors version ebike of P01-P16 settings, please check the following.
| Content Description |
number | |
| P01 | km/mile | 00 |
| P02 | v | 48 |
| P03 | gear | 0-5 |
| P04 | wheel size | 20 |
| P05 | magnet number | 01 |
| P06 | unrestricted speed | 51 kmh |
| P07 | controller current limit setting | 30 |
| P08 | PAS sensor direction | r u n-F |
| P09 | pedal assist sensitivity | 03 |
| P10 | number of pedal assist sensor magnets | PAS 12 |
| P11 | throttle mode setting | 00 |
| P12 | the throttle Level | 01 |
| P13 | the power-on password | 1313 |
| P14 | the auto sleep time | 5L 10 |
| P15 | the battery discharge mode | 00 |
| P16 | e dual drive current limiting | 01 |
