How to protect your electric mountain bike for adults?
Learn about bike chain protection in electric mountain bike maintenance today. A clean chain will keep your bike running smoothly and performing back to its original factory condition. Helps riders better express themselves. At the same time, it can prolong the service life of the bicycle chain.
Bicycle chain wear is caused by friction between the grit and the chain. If you want to reduce the wear and tear of the bicycle, it is necessary to clean the chain in time. Regular and correct cleaning of the bicycle chain can avoid the adhesion of stubborn oil stains in time. This operation can save you a lot of money on replacing chains, sprockets, and chainrings.
Experimental studies have shown that a dirty chainring can drastically reduce the performance of a bike. Friction on the chain also increases when the chain is not properly cleaned and lubricated. Typically a clean and well-lubricated chain only draws about 7 watts of power on the road, but when the chain gets dirty, an extra 3 watts is lost.
It's a well-known fact that the quickest way to clean a chain is to replace it. If the chain wears too much, it's pointless to waste time on it. As soon as the chains show signs of contamination and wear, we should remove the old chains from the bike and properly wash them with cleaning equipment.
The most effective way to clean the chain is to remove it and put it in the ultrasonic cleaner. It only takes five minutes to remove the stubborn stains, and the effect is very obvious. If you don't have an ultrasonic cleaner, scrubbing the chain can achieve almost the same effect, and a clean chain can make you ride faster. For the average biker, a regular dishwasher brush, old toothbrush, or even a toilet brush can be used to clean the bike chain.
Whether you're cleaning the chain with a stiff brush, a rag or an ultrasonic machine, decontamination is best done outdoors so you don't mess up your home. It is recommended not to use harmful solvents containing diesel, benzene, gasoline or acetone, and products that are safe and harmless to the environment should be selected.
If your ebike has disc brakes, you can remove the rear wheel while washing the chain and wrap the brake caliper in a plastic bag to prevent oil from splashing on the disc.
If you are looking to replace a electric mountain bike, I recommend the RANDRIDE Explorer Pro which has 26 * 4.0 inches CST fat tire，SHIMANO 27 speed and SHIMANO hydraulic brake system, configure the brushless geared hub motor with 1000W and 100Nm of torque, speeds of up to 30 mph can help you conquer rough terrain and traverse steep hills with ease.
View more about this fat tire electric mountain bike：https://randridebikes.com/products/fat-tire-electric-bike
lascia un commento